按照歐盟MD機械指令的法規要求，注塑機屬于ANNIX IV危險機械，需要由歐盟公告號擁有危險機械條款10. Injection or compression plastics-moulding machinery with manual loading or unloading授權的機構進行測試認證，頒發EC-TYPE證書

為您專業解讀注塑機CE認證：

1、注塑機歐盟CE認證指令

MD機械指令：2006/42/EC

2、注塑機歐盟CE認證標準：

EN ISO 12100：2010 機械安全 - 用于設計的一般準則-風險評估及風險降低

EN 60204-1：2018 機械安全.機械電氣設備.第1部分：一般要求

EN ISO 20430:2020 Plastics and rubber machines - Injection moulding machines - Safety

requirements (ISO 20430:2020) 塑料和橡膠機械.注塑機.安全要求（ISO 20430:2020）

3、EN ISO 20430:2020適用范圍：

This document specifies the essential safety requirements for the design and construction of injection moulding machines for the processing of plastics and/or rubber and provides information for their safe use.

This document is applicable only to injection moulding machines with hydraulic and/or electrical drives for platen movement.

This document deals with all significant hazards, hazardous situations and events relevant to injection moulding machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) during the life cycle of the machinery (see ISO 12100:2010, 5.4).

The following are not covered:

— machines on which the clamping unit can only be operated by the physical force of the operator;

— machines for which the hydraulic jack can only be manually operated;

— injection blow moulding machines;

— machines for reaction injection moulding;

— compression moulding machines and transfer moulding machines;

— direct-on sole moulding machines, unit sole and footwear component moulding machines, full shoe and boot moulding machines;

— design of an exhaust system;

— design and construction of the mould.

NOTE Moulds and exhaust systems are not part of the machinery.

This document is not applicable to injection moulding machines which are manufactured before the date of its publication.

本文件規定了塑料和/或橡膠加工用注塑機的設計和施工的基本安全要求，并提供了安全使用信息。

本文件僅適用于帶有液壓和/或電動傳動裝置的注塑機，用于臺板移動。

本文件涉及與注塑機相關的所有重大危險、危險情況和事件，當注塑機按預期使用時，以及在機器生命周期內制造商可合理預見的誤用條件下（見附錄A）（見ISO 12100:2010，5.4）。

以下內容不包括在內：

--夾緊單元只能通過操作員的體力在其上操作的機器；

--液壓千斤頂只能手動操作的機器；

--注塑機；

--反應注射成型機；

--壓縮成型機和轉移成型機；

--直裝式鞋底成型機、整體式鞋底和鞋類部件成型機、全鞋和靴子成型機；

--排氣系統的設計；

--模具的設計和施工。

注：模具和排氣系統不是機器的一部分。

本文件不適用于在其發布日期之前制造的注塑機。