| 規 格: |
型 號: |
數 量: |
| 品 牌:長粵智能 |
包 裝: |
價 格:面議 |
點膠閥 CY3605CY5705 產品介紹 Product Introduction CY3605/CY5705 點膠閥適用一般粘結劑,點、涂、畫線多種流體控制。中低粘度液體可以使用點膠針打點,畫線,走圓,不規則路徑,也可根據需求接毛刷針頭進行刷膠作業。關膠距離針頭間距小,關膠迅速。 CY3605/CY5705 dispensing valves are suitable for general adhesives and support various fluid control operations including dispensing, coating and line drawing. For medium and low viscosity liquids, the dispensing needle can be used to apply dots, draw lines, trace circles and follow irregular paths. Brush needles can also be connected for glue brushing as required. The shut-off position is close to the needle tip, ensuring fast and clean shut-off. 產品參數 Product parameters ※ 驅動氣壓: 0.4 ~ 0.6MPa ※ 液體輸送壓力: 0.1 ~ 0.6MPa 要求可調 ※ 主體材質: 7075 合金鋁 ※ 關閉方式: 單動 / 雙動均可 ※ 出膠口徑: Ø1.5mm ※ 適用液體: 硅膠、環氧樹脂、潤滑液體等 ※ 粘度范圍: 1 ~ 15000Cps ※ 加溫溫度: 0-50 度 ※ 外形尺寸 (L×W×H) : 25X25X164 ※ 重量: 300g ※ 進液方式: 管道連接,(壓力罐) ※ 閥體尺寸: CY3605 24x25x18mm CY5705 21x21x12mm
|